New PC Build with my first custom water loop

Backstory of the PC build

My wife and I had ordered some new lamps for our bedroom, when we got a package that had everything BUT our new lamps! After opening the box, I found there was a VERY nice graphics card inside, especially during the graphics card price hike we’ve been seeing going on.

Needless to say, after contacting the company about the mistake, we were apologized to, and told to keep the contents of the package we had received..

After months of this graphics card, an AMD Radeon RX 6900XT had been sitting in my office, and a few awesome birthday gifts. I ended up finally getting to start a new PC build!

Build List:

  • AMD Ryzen 5900x
  • RX 6900 XT
  • 64 GB DDR4 3200 mhz
  • 850GT EVGA Power Supply
  • Strix B550-F Gaming Mobo
  • 2TB NVME SSD 970 Evo

New Sit/Stand Desk Setup

New Desk Setup. Final product!
Started with a frame from Amazon: https://www.amazon.com/dp/B07WFR5WB8?psc=1&ref=ppx_yo2_dt_b_product_details for $549

Ended up going with Birch Butcher block from Home Depot. Long piece is 72″ x 25″, and short piece is 48″ x 25″.

Birch Butcher Block from Home Depot sanded down to 220 grit
After the oil based stain
Few coats of poly later

Using a coat of oil based wood stain, and 3 coats of polyurethane, light sanding in between coats with 320 grit sand paper. I finished up by letting the final coat dry for 24 hours, and did a final wet sanding with 2000 grit sand paper to smooth out the finish completely.